• TPT pressure resistant silicone tube

TPT pressure resistant silicone tube

Product Description

Product specification

 

TPT pressure resistant silicon tubing, compared with traditional woven pressure resistant silicon tubing, is transparent and without reinforcement layer, which is not only convenient for users to observe the fluid in the pipe, but also can effectively avoid the possible isolation and falling off when cutting woven mesh tubing. It can be applied to one-time systems such as virus filtration, ultrafiltration and large capacity fluid transmission, with faster pressure transmission capacity, providing better service for one-time system application.

 

Scope of application

 

· Pharmaceutical and biotechnology processes · Ultra pure fluid transmission

·Disposable system        · Peristaltic pump transportation

· Virus filtering      · Harvesting and ultrafiltration

 

Product features

 · Insoluble particle test according to USP 788

  · Avoid particles falling off when cutting woven reinforced tubing

· No animal derived ingredients

· Operating temperature range: - 60 °C to 200 °C

· With high temperature and high pressure sterilization or gamma γ Radiation sterilization

· According to the method VDmax 25 in ISO 11137, sterility validation can be carried out by gamma ray irradiation

· Traceable record batch, double packing, with marking on the package

· In line with documented quality control of ISO 9001:2015

· Complete validation package can be provided on request

· Monthly monitoring and inspection of microorganisms and suspended particles in clean workshop

· Pest free management in the factory and plants

 

Characteristic physical properties

 

PropertiesASTM methodASTM method
Hardness: 15 seconds tested by Shore A hardness testerD224050
Tensile strength psiD4121290
Elongation at break 100%D412480
Tear strength ppiD642102
Specific gravityD7921.13
Tensile modulus psiD412306


Biocompatibility

 

Validation itemsRegulations and standards
Bacterial endotoxinUSP 85
Biological reactivity test - in situ vitroUSP 87
Biological reactivity test - in situ vivoUSP 88
Elastic sealant for injectionUSP 381
Physicochemical properties of plasticsUSP 661
Insoluble particlesUSP 788
Genotoxicity, carcinogenicity and reproductive toxicityISO 10993 3
Test selection for interaction with blood - in vitro blood compatibilityISO 10993 4
In vitro cytotoxicity testISO 10993 5
Stimulation and sensitivity test - Kligman maximization testISO 10993 10
Systemic toxicity testISO 10993 11
Rubber productsFDA 21 CFR 177.2600
Sealing and pipe testing of silicone elastomersEP 3.1.9
ExtractablesBPOG


Ordering information 

 

No.

Internal diameter

(mm)(inch )

External diameter

(mm)(inch )

Wall thickness

(mm)(inch )

Length (m)
SUS-TGP-0125-02503.18      1/86.35     1/41.59     1/1615
SUS-TGP-0125-03133.18      1/87.95      5/162.38     3/3215
SUS-TGP-0188-03134.76      3/167.95      5/161.59     1/1615
SUS-TGP-0188-03754.76      3/169.53      3/82.38      3/3215
SUS-TGP-0188-04384.76      3/1611.11     7/163.18      1/415
SUS-TGP-0250-03756.35      1/49.53       3/81.59      1/1615
SUS-TGP-0250-04386.35      1/411.11     7/162.38      3/3215
SUS-TGP-0250-05006.35      1/412.7       3/83.18      1/815
SUS-TGP-0313-05007.95      5/1612.7       7/162.38      3/3215
SUS-TGP-0375-05639.53      3/814.3       1/22.38      1/815
SUS-TGP-0375-06259.53      3/815.88     1/23.18      3/3215
SUS-TGP-0500-068812.7      1/217.47     9/162.38      3/3215
SUS-TGP-0500-075012.7      1/219.05      5/183.18      1/815
SUS-TGP-0625-087515.88     5/822.22      11/163.18      1/815
SUS-TGP-0750-100019.05     3/425.4        3/43.18      1/815
SUS-TGP-0750-112519.05     3/428.57      1-1/84.76      3/1615
SUS-TGP-0750-125019.05     3/431.75      1-1/46.35      1/415

SUS-TGP-1000-137

25.4       134.92      1-3/84.76      3/1615



 


Related Products

Contact Us
  • Tel.: +86 21 6434 0155
  • E-mail: marketing@duoningbio.com
  • Add.: Building 30, 1525#, Minqiang Road, Songjiang Distriction, Shanghai
Follow Us

E-mail WeChat